I have a PVC modded and release valve plugged Old Version SM
1500. I am going to use a To Go snack bottle filled with packaging peanuts to make a stock for it. After that
I am going to attempt to secure an SSPB to it and add a scope made from an M&M Minis bottle.
Also, if you look at the four barrel assembly you'll notice that only the front part needs
to rotate. The part that connects with the stub on hte air tank does not need to move. I plan on gluing the 4
barrel assembly to the stub on the air tank where they connect. This should make a much better seal and therefore increase
distance.
